Using iPrint with a secondary IP address

(Last modified: 20Aug2003)

This document (10068285) is provided subject to the disclaimer at the end of this document.

goal

fact

Novell NetWare 6.0

NetWare 5.1

NW51SP3.EXE

symptom

Unable to access iManage on secondary IP address.

can't access iPrint web page on secondary IP address

NDPSM binding to wrong IP address

change

By default, NDPS and iPrint will use the first IP address bound to the server's LAN card as viewed in AUTOEXEC.NCF or INETCFG >View Configuration > Protocol Bind Commands.

fix

To configure iPrint to use a secondary IP address, bind both the NDPSM manager and the http stack to the secondary IP address as follows:

1. Bind the NDPS manager to the secondary IP address with the command:

NDPSM /ipaddress = xxx.xxx.xxx.xxx

For more details see tid 10065012: Can the NDPS Manager specify an IP address?

2. Bind httpstk to the secondary IP address with the command:

HTTPBIND XXX.XXX.XXX.XXX /keyfile:"<SSL Certificate Name>"

For more details see tid 10066825: Multiple IP Addresses for Management Portal (HTTPSTK)

document

Document Title:	Using iPrint with a secondary IP address
Document ID:	10068285
Solution ID:	NOVL71838
Creation Date:	13Feb2002
Modified Date:	20Aug2003
Novell Product Class:	NetWare

disclaimer

The Origin of this information may be internal or external to Novell. Novell makes all reasonable efforts to verify this information. However, the information provided in this document is for your information only. Novell makes no explicit or implied claims to the validity of this information.
Any trademarks referenced in this document are the property of their respective owners. Consult your product manuals for complete trademark information.