ID's don't match using the MIRROR STATUS Command in NetWare 6

(Last modified: 12Feb2002)

This document (10067557) is provided subject to the disclaimer at the end of this document.

goal

ID's don't match using the MIRROR STATUS Command in NetWare 6

fact

Novell NetWare 6.0

fix

If you are using the MIRROR STATUS command from the console, you should see the mirror ID for the pool on that server.

Mirror ID's should and will differ between nodes on shared media, therefore mirror sets will have a different ID between servers for the same set.

MIRROR STATUS will show the status of the active or deactive pools on the node in question.

fact

NetWare Cluster Services 1.60

document

Document Title: ID's don't match using the MIRROR STATUS Command in NetWare 6
Document ID: 10067557
Solution ID: NOVL68964
Creation Date: 15Jan2002
Modified Date: 12Feb2002
Novell Product Class:Netware

disclaimer

The Origin of this information may be internal or external to Novell. Novell makes all reasonable efforts to verify this information. However, the information provided in this document is for your information only. Novell makes no explicit or implied claims to the validity of this information.
Any trademarks referenced in this document are the property of their respective owners. Consult your product manuals for complete trademark information.