ERROR: "adding a network address property < IPX address>"
(Last modified: 22Jan2003)
This document (10063799) is provided subject to the disclaimer at the end of this document.
fact
Novell NetWare 5.1
symptom
ERROR: "adding a network address property < IPX address>"
fact
Error occurs when running DSREPAIR
Server is configured for IP only
IPX Protocol is disabled
cause
NDS reads information from the Bindery and may be picking up the address from there.
fix
Set NCP enable IPX address = off
This will basically disable or remove the internal IPX network number. The internal IPX network number is also your server ID. Another way to stop referencing the internal IPX network number is to REM it out the server ID from the AUTOEXEC.NCF and reboot the server.
document
Document Title: | ERROR: "adding a network address property < IPX address>" |
Document ID: | 10063799 |
Solution ID: | NOVL54120 |
Creation Date: | 26Jul2001 |
Modified Date: | 22Jan2003 |
Novell Product Class: | NetWare |
disclaimer
The Origin of this information may be internal or external to Novell. Novell makes all reasonable efforts to verify this information. However, the information provided in this document is for your information only. Novell makes no explicit or implied claims to the validity of this information.
Any trademarks referenced in this document are the property of their respective owners. Consult your product manuals for complete trademark information.